Are you curious about the best milled carbon fiber suppliers? Understanding the top factories is crucial for making informed choices in your projects. Discovering the right supplier can enhance quality and performance. Dive in to explore our comparison and find the perfect fit for your needs!
Milled Carbon Fiber Suppliers – Thomasnet
Product Details: Milled carbon fiber used as a reinforcement agent for epoxy resins and thermosetting materials.
Technical Parameters:
– Average micron length: 100 +/- 25 microns
– Melting point temperature: 3,200 degrees F to 3,400 degrees F
Application Scenarios:
– Aerospace
– Automotive
Pros:
– Corrosion and abrasive resistant
– Withstands high temperatures
Cons:
– Limited availability in specific micron lengths
– Potentially higher cost compared to other fibers
Milled Fibers | Carbon Fiber | PRODUCTS | Carbon Fiber Composite …
Product Details: TORAYCA™ milled fiber and ZOLTEK™ PX35/PX30 milled carbon fiber for reinforcement in various matrices.
Technical Parameters:
– Available lengths: 30 to 300 μm
– Free of sizing
Application Scenarios:
– Brakes/clutches for automotive applications
– Housing parts for electrical applications
Pros:
– High performance in tensile strength and modulus
– Good electrical conductivity
Cons:
– Limited information on specific drawbacks
– Generic placeholders for cons
SIGRAFIL ® Short Carbon Fibers
Product Details: SIGRAFIL short carbon fibers are based on high-quality continuous carbon fiber tows, available in chopped and milled forms.
Technical Parameters:
– Excellent mechanical properties
– Low density
– Very good feedability
– Good dispersibility
– Controlled length distribution
Application Scenarios:
– Reinforcing material or filler in thermoplastic injection molding processes
– Enhancing mechanical properties and electrical conductivity in various materials
Pros:
– High strength and stiffness
– Versatile applications in different industries
Cons:
– Limited availability of specific fiber lengths
– Potentially higher cost compared to traditional fillers
Milled Fiber – Teijin Carbon
Product Details: Tenax™ Milled Fibers are high-performance carbon fiber powders without any preparation, providing mechanical reinforcement and electrical conductivity to polymer compounds.
Technical Parameters:
– Aspect ratio sufficient for mechanical reinforcement and electrical conductivity
– Bulk density: Tenax™-A (HT M100 60MU) – 550 g/l, Tenax™-E (HT M500 80MU) – 500 g…
Application Scenarios:
– Parts produced with additive manufacturing
– Conductive flooring and electronic devices
Pros:
– Dimensionally stable and distortion-free
– Good wear resistance
Cons:
– N/A
– N/A
Milled Carbon Fibers | Products & Suppliers – GlobalSpec
Product Details: MC514MG is a high performance thermoset composite manufactured using woven fiber glass and a high temperature phenolic resin system with a milled graphitic carbon additive.
Technical Parameters:
– Filler Material: Fabric, Fiber Glass
– Industry: Electronics
– Material Type / Grade: UL Approved
– Thermoset / Crosslinked: Yes
Application Scenarios:
– Used in electronics for high performance applications.
– Suitable for environments requiring reliability under rough conditions.
Pros:
– Excellent corrosion resistance and weight saving compared to carbon steel.
– High performance thermoset composite with UL approval.
Cons:
– Limited to specific applications in electronics and heavy-duty environments.
– Potentially higher cost compared to standard materials.
Carbon fiber milled – Dreytek Inc.
Product Details: Milled carbon fibers are carbon fiber strands milled into very short, powder-like fiber. MCF80 has an average fiber length of 80 µm.
Technical Parameters:
– Superior mechanical & electrical properties
– Higher heat/abrasion resistance
Application Scenarios:
– Conductive flooring
– Brake pads
Pros:
– Better level of reinforcement to thermoplastics and thermosetting resins
– Higher electric conductivity compared to unreinforced polymer
Cons:
– Short and variable fiber size
– Potential limitations in certain applications
Milled Carbon Fiber Powder Manufacturers Suppliers | Custom Service
Product Details: Milled carbon fiber powder is produced by milling and grinding the carbon fiber into carbon powder in different density. Coated or non-coated milled carbon is available for choose.
Technical Parameters:
– Standard milled carbon fiber: 50um(300mesh), 75um(200mesh), 150um(100mesh)
– Density: 1.75g/cm3, Carbon content: >95%, Tensile modulus: 3.5GPa
Application Scenarios:
– Used to produce electronic chips and parts
– Used in conducting floor, anti-static usage such as paint, building insulation,…
Pros:
– Good abrasion property
– Good dimensional stability
Cons:
– Limited information on specific applications
– Potential variability in fiber length and density
Pitch Fiber – Mitsubishi Chemical Carbon Fiber Composites
Product Details: DIALEAD is a high performance coal tar pitch based carbon fiber, available in a large range of product formats from low to ultra high tensile modulus grades.
Technical Parameters:
– High and Ultra High Tensile Modulus grades suitable for prepregging, filament wi…
– Widely used in thermoplastic and thermosetting resins to improve electric and th…
Application Scenarios:
– Used in various composite applications including rollers and fabrics.
– Applicable in industries requiring enhanced mechanical properties and conductivi…
Pros:
– Improves electric and thermal conductivity.
– Enhances mechanical strength in composite materials.
Cons:
– Limited information on specific applications.
– Potential variability in performance based on product format.
ZOLTEK Corporation – The world’s trusted cost-efficient carbon fiber …
Product Details: Zoltek offers a range of carbon fiber products including Zoltek PX35, Zoltek PX30, and Post-Industrial Fiber, suitable for various industrial applications.
Technical Parameters:
– High strength-to-weight ratio
– High thermal performance
Application Scenarios:
– Automotive components
– Wind turbine blades
– Energy storage systems
– Marine applications
– Oil and gas piping
Pros:
– Lightweight and durable
– Corrosion resistant
Cons:
– Higher cost compared to traditional materials
– Requires specialized manufacturing processes
Hexcel | Composite Materials and Structures
Product Details: HexTow IM9 24K is an intermediate modulus fiber providing a 12% improvement in tensile strength compared to Hexcel IM7 fiber, used in aerospace applications.
Technical Parameters:
– Intermediate modulus fiber
– 12% improvement in tensile strength
Application Scenarios:
– Commercial aircraft engine fan blades
– Other aerospace applications
Pros:
– High tensile strength
– Proven legacy in aerospace
Cons:
– Specific applications may be limited
– Cost may be higher than standard fibers
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Milled Carbon Fiber Suppliers – Thomasnet | Milled carbon fiber used as a reinforcement agent for epoxy resins and thermosetting materials. | – Corrosion and abrasive resistant – Withstands high temperatures | – Limited availability in specific micron lengths – Potentially higher cost compared to other fibers | www.thomasnet.com |
| Milled Fibers | Carbon Fiber | PRODUCTS | Carbon Fiber Composite … | TORAYCA™ milled fiber and ZOLTEK™ PX35/PX30 milled carbon fiber for reinforcement in various matrices. |
| SIGRAFIL ® Short Carbon Fibers | SIGRAFIL short carbon fibers are based on high-quality continuous carbon fiber tows, available in chopped and milled forms. | – High strength and stiffness – Versatile applications in different industries | – Limited availability of specific fiber lengths – Potentially higher cost compared to traditional fillers | www.sglcarbon.com |
| Milled Fiber – Teijin Carbon | Tenax™ Milled Fibers are high-performance carbon fiber powders without any preparation, providing mechanical reinforcement and electrical conductivity… | – Dimensionally stable and distortion-free – Good wear resistance | – N/A – N/A | www.teijincarbon.com |
| Milled Carbon Fibers | Products & Suppliers – GlobalSpec | MC514MG is a high performance thermoset composite manufactured using woven fiber glass and a high temperature phenolic resin system with a milled grap… | – Excellent corrosion resistance and weight saving compared to carbon steel. – High performance thermoset composite with UL approval. | – Limited to specific applications in electronics and heavy-duty environments. – Potentially higher cost compared to standard materials. |
| Carbon fiber milled – Dreytek Inc. | Milled carbon fibers are carbon fiber strands milled into very short, powder-like fiber. MCF80 has an average fiber length of 80 µm. | – Better level of reinforcement to thermoplastics and thermosetting resins – Higher electric conductivity compared to unreinforced polymer | – Short and variable fiber size – Potential limitations in certain applications | www.dreytek.com |
| Milled Carbon Fiber Powder Manufacturers Suppliers | Custom Service | Milled carbon fiber powder is produced by milling and grinding the carbon fiber into carbon powder in different density. Coated or non-coated milled c… | – Good abrasion property – Good dimensional stability | – Limited information on specific applications – Potential variability in fiber length and density |
| Pitch Fiber – Mitsubishi Chemical Carbon Fiber Composites | DIALEAD is a high performance coal tar pitch based carbon fiber, available in a large range of product formats from low to ultra high tensile modulus… | – Improves electric and thermal conductivity. – Enhances mechanical strength in composite materials. | – Limited information on specific applications. – Potential variability in performance based on product format. | mccfc.com |
| ZOLTEK Corporation – The world’s trusted cost-efficient carbon fiber … | Zoltek offers a range of carbon fiber products including Zoltek PX35, Zoltek PX30, and Post-Industrial Fiber, suitable for various industrial applicat… | – Lightweight and durable – Corrosion resistant | – Higher cost compared to traditional materials – Requires specialized manufacturing processes | zoltek.com |
| Hexcel | Composite Materials and Structures | HexTow IM9 24K is an intermediate modulus fiber providing a 12% improvement in tensile strength compared to Hexcel IM7 fiber, used in aerospace applic… | – High tensile strength – Proven legacy in aerospace | – Specific applications may be limited – Cost may be higher than standard fibers |
Frequently Asked Questions (FAQs)
What is milled carbon fiber, and why is it used?
Milled carbon fiber is a processed form of carbon fiber that has been ground into fine particles. It is used for its lightweight, high strength, and durability, making it ideal for various applications, including automotive, aerospace, and sporting goods. Its unique properties enhance the performance of composite materials.
How do I choose the right milled carbon fiber supplier?
When selecting a supplier, consider their experience, product quality, and customer service. Look for certifications, reviews, and their ability to meet your specific needs. It’s also helpful to request samples to evaluate the material before making a commitment.
What are the typical lead times for milled carbon fiber orders?
Lead times can vary based on the supplier and order size. Generally, you can expect anywhere from a few days to several weeks. It’s best to communicate your timeline with the supplier to ensure they can meet your deadlines.
Can I customize my milled carbon fiber order?
Yes, many suppliers offer customization options, including particle size, resin type, and specific formulations. Discuss your requirements with the supplier to see how they can accommodate your needs and create a product tailored to your application.
What are the benefits of working with a local milled carbon fiber supplier?
Working with a local supplier can provide faster shipping times, easier communication, and the ability to visit the facility if needed. Additionally, supporting local businesses can contribute to your community’s economy and reduce your carbon footprint through shorter transportation distances.
