Are you looking to power your projects with the best NEMA 17 stepper motors? Understanding the top suppliers can make all the difference in performance and reliability. Discovering the right factory means enhanced efficiency and quality. Dive in to find out which suppliers stand out and elevate your next project!
NEMA 17 Stepper Motors Supplier – Electromate Inc.
Product Details: NEMA 17 stepper motors with a 1.8 degree step angle (200 steps/revolution) and a 1.7 x 1.7 inch faceplate.
Technical Parameters:
– Holding Torque: 22 oz-in to 115 oz-in
– Recommended Driving Voltage: 12-24V
Application Scenarios:
– Robotics
– CNC Machining
– 3D Printers
– Laser Cutters
Pros:
– Higher torque compared to smaller stepper motors
– RoHS compliant
Cons:
– Limited to specific frame sizes
– May require additional components for feedback
17 Stepper Motors | Electronic Components Distributor DigiKey
Product Details: Access to this page has been denied
Technical Parameters:
– N/A
– N/A
Application Scenarios:
– N/A
– N/A
Pros:
– N/A
– N/A
Cons:
– N/A
– N/A
Stepper Motor Manufacturer | NEMA 8,11,14,17,23,34,42
Product Details: GEMS Motor is a leading manufacturer of NEMA size stepper motors, from smallest NEMA 8 to largest NEMA 42. They supply geared stepper motors, closed loop stepper motors, and custom linear stepper motors.
Technical Parameters:
– NEMA frame sizes: 8, 11, 14, 17, 23, 34, 42
– Step angles: 1.8 degree, 0.9 degree, micro stepping
Application Scenarios:
– Medical devices
– 3D printers
– CNC machines
– Packaging machines
Pros:
– Relatively inexpensive compared to brushless DC motors
– Accurate control for precise positioning without feedback devices
Cons:
– Limited to specific applications
– May require more power for larger sizes
NEMA 17 Stepper Motor Manufacturer | Priced from $7.5
Product Details: NEMA 17 hybrid stepper motors are widely used in 3D printers and small CNC mills. GEMS supplies two NEMA 17 product lines including 0.9 degree and 1.8 degree step angles versions.
Technical Parameters:
– Holding torque up to 100 Oz-in (0.7 Nm)
– 0.9 degree Step angle +- 5%
Application Scenarios:
– 3D printers
– Small CNC mills
Pros:
– High holding torque
– Versatile configurations available
Cons:
– Limited operating temperature range
– Potential complexity with wiring configurations
NEMA 17 Stepper Motors – McMaster-Carr
Product Details: NEMA 17 Stepper Motor
Technical Parameters:
– Frame Size: NEMA 17
– Type: Stepper Motor
Application Scenarios:
– 3D Printers
– CNC Machines
Pros:
– High precision control
– Good torque at low speeds
Cons:
– Limited speed range
– Can overheat under continuous use
NEMA 17 Stepper Motor | Products & Suppliers – GlobalSpec
Product Details: NEMA 17 Stepper Motor
Technical Parameters:
– Holding Torque: 45 Ncm
– Step Angle: 1.8 degrees
Application Scenarios:
– 3D Printers
– CNC Machines
Pros:
– High precision
– Good torque at low speeds
Cons:
– Limited speed range
– Can overheat under continuous use
Nema 17 Stepper Motor – Oyostepper.com
Product Details: NEMA 17 stepper motors with a standard frame size of 42 x 42 mm, widely used in hobbyist and industrial applications.
Technical Parameters:
– Step Angle: 1.8° (also available in 0.9° for higher precision)
– Holding Torque: 20 to 80 oz-in (0.14 to 0.56 Nm)
Application Scenarios:
– 3D printers
– CNC machines
Pros:
– Moderate size and reliable performance
– Widely available and cost-effective
Cons:
– May not be suitable for heavy-duty applications
– Limited power for continuous heavy load handling
Nema 17 – 42 x 42mm Stepper Motor – STEPPERONLINE
Product Details: Nema 17 stepper motor with a 1.7 x 1.7 inch (42 x 42mm) faceplate, available in various configurations including bipolar and unipolar types.
Technical Parameters:
– Step Angle: 1.8° or 0.9°
– Holding Torque: Ranges from 11Ncm to 60Ncm depending on the model
Application Scenarios:
– 3D printers
– CNC machines
Pros:
– High torque output with minimal vibration
– Wide range of motor windings and stack lengths available
Cons:
– Limited to specific frame sizes (NEMA standards)
– Potential for overheating if not properly managed
NEMA 17 Stepper Motors Stepper Motors – Mouser – Mouser Electronics
Product Details: NEMA 17 Stepper Motors
Technical Parameters:
– Size: NEMA 17
– Type: Stepper Motors
Application Scenarios:
– 3D Printers
– CNC Machines
Pros:
– High precision
– Good torque at low speeds
Cons:
– Can be noisy
– Requires a driver for operation
NEMA 17 Stepper Driver Stepper Motors – Mouser – Mouser Electronics
Product Details: NEMA 17 Stepper Motor Driver
Technical Parameters:
– Voltage: 12-48V
– Current: 1.5A per phase
Application Scenarios:
– 3D Printers
– CNC Machines
Pros:
– High precision control
– Low noise operation
Cons:
– Limited speed range
– Requires complex control algorithms
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| NEMA 17 Stepper Motors Supplier – Electromate Inc. | NEMA 17 stepper motors with a 1.8 degree step angle (200 steps/revolution) and a 1.7 x 1.7 inch faceplate. | – Higher torque compared to smaller stepper motors – RoHS compliant | – Limited to specific frame sizes – May require additional components for feedback | www.electromate.com |
| 17 Stepper Motors | Electronic Components Distributor DigiKey | Access to this page has been denied | – N/A – N/A | – N/A – N/A |
| Stepper Motor Manufacturer | NEMA 8,11,14,17,23,34,42 | GEMS Motor is a leading manufacturer of NEMA size stepper motors, from smallest NEMA 8 to largest NEMA 42. They supply geared stepper motors, closed l… | – Relatively inexpensive compared to brushless DC motors – Accurate control for precise positioning without feedback devices | – Limited to specific applications – May require more power for larger sizes |
| NEMA 17 Stepper Motor Manufacturer | Priced from $7.5 | NEMA 17 hybrid stepper motors are widely used in 3D printers and small CNC mills. GEMS supplies two NEMA 17 product lines including 0.9 degree and 1.8… | – High holding torque – Versatile configurations available | – Limited operating temperature range – Potential complexity with wiring configurations |
| NEMA 17 Stepper Motors – McMaster-Carr | NEMA 17 Stepper Motor | – High precision control – Good torque at low speeds | – Limited speed range – Can overheat under continuous use | www.mcmaster.com |
| NEMA 17 Stepper Motor | Products & Suppliers – GlobalSpec | NEMA 17 Stepper Motor | – High precision – Good torque at low speeds | – Limited speed range – Can overheat under continuous use |
| Nema 17 Stepper Motor – Oyostepper.com | NEMA 17 stepper motors with a standard frame size of 42 x 42 mm, widely used in hobbyist and industrial applications. | – Moderate size and reliable performance – Widely available and cost-effective | – May not be suitable for heavy-duty applications – Limited power for continuous heavy load handling | www.oyostepper.com |
| Nema 17 – 42 x 42mm Stepper Motor – STEPPERONLINE | Nema 17 stepper motor with a 1.7 x 1.7 inch (42 x 42mm) faceplate, available in various configurations including bipolar and unipolar types. | – High torque output with minimal vibration – Wide range of motor windings and stack lengths available | – Limited to specific frame sizes (NEMA standards) – Potential for overheating if not properly managed | www.omc-stepperonline.com |
| NEMA 17 Stepper Motors Stepper Motors – Mouser – Mouser Electronics | NEMA 17 Stepper Motors | – High precision – Good torque at low speeds | – Can be noisy – Requires a driver for operation | www.mouser.com |
| NEMA 17 Stepper Driver Stepper Motors – Mouser – Mouser Electronics | NEMA 17 Stepper Motor Driver | – High precision control – Low noise operation | – Limited speed range – Requires complex control algorithms | www.mouser.com |
Frequently Asked Questions (FAQs)
What is a NEMA 17 stepper motor?
A NEMA 17 stepper motor is a type of stepper motor with a 1.7-inch faceplate size. It’s widely used in various applications, including 3D printers, CNC machines, and robotics, due to its precise control and reliability.
What should I consider when choosing a NEMA 17 stepper motor supplier?
When selecting a supplier, consider their reputation, product quality, pricing, and customer service. It’s also important to check their manufacturing capabilities and whether they offer customization options to meet your specific needs.
How can I ensure the quality of NEMA 17 stepper motors?
To ensure quality, look for suppliers that adhere to international standards and have certifications like ISO. Request samples to test performance and reliability, and read reviews from other customers to gauge their experiences.
What is the typical lead time for NEMA 17 stepper motors from suppliers?
Lead times can vary based on the supplier and order size, but typically range from a few days to several weeks. It’s best to communicate directly with the supplier for accurate timelines based on your specific order.
Do NEMA 17 stepper motor suppliers offer technical support?
Most reputable suppliers provide technical support to help you with installation, troubleshooting, and optimizing performance. Be sure to inquire about the level of support they offer before making a purchase.
