Are you searching for the best PTFE suppliers? Understanding the top factories can make a significant difference in your projects. By comparing these suppliers, you can ensure quality and reliability. Dive in to discover the best options available and make informed choices for your needs!
Home – Enflo
Product Details: Enflo manufactures a wide variety of skived and molded PTFE sheets, PTFE tape, extruded and molded PTFE rods, extruded PTFE tubing, and molded PTFE cylinders. Most products are available in Virgin, Reprocessed, and ENFLON ® (filled PTFE).
Technical Parameters:
– Virgin PTFE
– Filled PTFE (Enflon®)
Application Scenarios:
– Chemical Processing
– Aerospace and Defense
Pros:
– High chemical resistance
– Custom sizes available
Cons:
– Higher cost compared to other materials
– Limited temperature range
PTFE Materials Supplier & Manufacturer | AFT Fluorotec
Product Details: PTFE (Polytetrafluoroethylene) is a synthetic fluoropolymer known for its versatility, hydrophobic nature, high density, and resistance to high temperatures.
Technical Parameters:
– Excellent electrical insulator
– Low friction
Application Scenarios:
– Medical devices
– Food packaging
Pros:
– Chemically resistant and inert
– FDA approved and food safe
Cons:
– Limited mechanical strength without fillers
– Potential environmental concerns related to PFAS
PTFE (Teflon®) Sheet, Rod & Tubes | Piedmont Plastics
Product Details: Piedmont Plastics carries virgin and mechanical PTFE, also known as Teflon®, available in sheets, rods and tubes for mechanical and electrical applications.
Technical Parameters:
– Low coefficient of friction
– Excellent electrical properties
– High chemical resistance
– Stability in wide temperature ranges
Application Scenarios:
– Electrical and thermal applications like coil separators and terminals
– High-temperature seals, insulators, and bearings
Pros:
– Extremely chemical resistant
– FDA approved for food and beverage applications
Cons:
– Mechanical grade PTFE has slightly lower physical properties than virgin PTFE
– Filled PTFE may vary in properties depending on the filler used
PTFE Products – Pexco
Product Details: PTFE Products from Pexco
Technical Parameters:
– High chemical resistance
– Temperature range: -200°C to 260°C
Application Scenarios:
– Chemical processing
– Food processing
Pros:
– Excellent non-stick properties
– Durable and long-lasting
Cons:
– Higher cost compared to other materials
– Limited mechanical strength
Polytetrafluoro-Ethylene (PTFE) Suppliers – Thomasnet
Product Details: Polytetrafluoroethylene (PTFE) is a high-performance plastic known for its chemical resistance and low coefficient of friction. It is available in various forms including sheets, rods, tubes, and films.
Technical Parameters:
– Operating temperature range: -350 to +500 degrees F
– Tensile strength: 4,500 psi
Application Scenarios:
– Used in aerospace, automotive, and chemical processing industries
– Suitable for gaskets, seals, bearings, and electrical insulation applications
Pros:
– Excellent chemical resistance
– Low friction properties
Cons:
– Can be expensive compared to other materials
– Limited mechanical strength at high temperatures
Home | PTFE Industries
Product Details: PTFE Industries offers a range of PTFE products including skived films, rolls, sheets, molded rods, tubes, and custom machined parts.
Technical Parameters:
– ISO 9001:2015 certified
– Custom machining capabilities
Application Scenarios:
– Semiconductor industry
– Food processing
Pros:
– High-quality PTFE products
– Customizable to exact specifications
Cons:
– Limited information on specific product dimensions
– Potentially higher cost for custom machining
PTFE | America’s Leading Plastics Supplier – Polymersan
Product Details: PTFE is a high molecular weight polymer composed of carbon and fluorine, known for its low friction and outstanding chemical resistance.
Technical Parameters:
– Compressive strength at a wide range of service temperatures (-400° to 500° F)
– Available in Bronze, Carbon, Glass, and Virgin grades
Application Scenarios:
– Bushings and bearings
– Gaskets and seals
Pros:
– Excellent thermal and electrical insulation properties
– Lowest coefficient of friction of any known material
Cons:
– Mechanical properties are low compared to other engineering plastics
– Limited applications in extreme conditions
Tef-Cap – Custom PTFE, PFA, & FEP Tubing Products | Extruded & Heat …
Product Details: Custom PTFE, PFA, and FEP tubing products including heat shrinkable and extruded options.
Technical Parameters:
– Temperature range: -275°F to 500°F
– Materials: PTFE, PFA, FEP, MFA, THV, ETFE, ECTFE, PVDF, PEEK
Application Scenarios:
– Aerospace industry
– Medical and pharmaceutical applications
Pros:
– High chemical resistance
– Custom fabrication available
Cons:
– Not certified to Mil Specifications 23053/11 and 23053/12
– Limited information on specific product dimensions
Custom-Manufactured PTFE Supplier | Prolon, Inc
Product Details: PTFE, also known as Teflon, is a low friction fluoropolymer with outstanding chemical and weathering resistance.
Technical Parameters:
– Operating temperatures from -400°F to 500°F
– Excellent electrical insulating properties
Application Scenarios:
– Chemical resistant seals and gaskets
– Fluid handling systems in the semiconductor market
Pros:
– Excellent sliding properties and nonstick surface
– Resistant to aggressive chemical agents and solvents
Cons:
– Low mechanical strength
– High specific gravity compared to other plastics
Shop PTFE Plastic Online – Curbell Plastics
Product Details: PTFE (Polytetrafluoroethylene) is a high-performance plastic known for its non-stick properties and chemical resistance.
Technical Parameters:
– Temperature resistance: up to 260°C
– Chemical resistance: excellent against acids and bases
Application Scenarios:
– Used in gaskets and seals
– Common in electrical insulation applications
Pros:
– Non-stick surface
– High chemical resistance
Cons:
– Can be expensive
– Not suitable for high-stress applications
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Home – Enflo | Enflo manufactures a wide variety of skived and molded PTFE sheets, PTFE tape, extruded and molded PTFE rods, extruded PTFE tubing, and molded PTFE cy… | – High chemical resistance – Custom sizes available | – Higher cost compared to other materials – Limited temperature range | www.enflo.com |
| PTFE Materials Supplier & Manufacturer | AFT Fluorotec | PTFE (Polytetrafluoroethylene) is a synthetic fluoropolymer known for its versatility, hydrophobic nature, high density, and resistance to high temper… | – Chemically resistant and inert – FDA approved and food safe | – Limited mechanical strength without fillers – Potential environmental concerns related to PFAS |
| PTFE (Teflon®) Sheet, Rod & Tubes | Piedmont Plastics | Piedmont Plastics carries virgin and mechanical PTFE, also known as Teflon®, available in sheets, rods and tubes for mechanical and electrical applica… | – Extremely chemical resistant – FDA approved for food and beverage applications | – Mechanical grade PTFE has slightly lower physical properties than virgin PTFE – Filled PTFE may vary in properties depending on the filler used |
| PTFE Products – Pexco | PTFE Products from Pexco | – Excellent non-stick properties – Durable and long-lasting | – Higher cost compared to other materials – Limited mechanical strength | www.pexco.com |
| Polytetrafluoro-Ethylene (PTFE) Suppliers – Thomasnet | Polytetrafluoroethylene (PTFE) is a high-performance plastic known for its chemical resistance and low coefficient of friction. It is available in var… | – Excellent chemical resistance – Low friction properties | – Can be expensive compared to other materials – Limited mechanical strength at high temperatures | www.thomasnet.com |
| Home | PTFE Industries | PTFE Industries offers a range of PTFE products including skived films, rolls, sheets, molded rods, tubes, and custom machined parts. | – High-quality PTFE products – Customizable to exact specifications | – Limited information on specific product dimensions – Potentially higher cost for custom machining |
| PTFE | America’s Leading Plastics Supplier – Polymersan | PTFE is a high molecular weight polymer composed of carbon and fluorine, known for its low friction and outstanding chemical resistance. | – Excellent thermal and electrical insulation properties – Lowest coefficient of friction of any known material | – Mechanical properties are low compared to other engineering plastics – Limited applications in extreme conditions |
| Tef-Cap – Custom PTFE, PFA, & FEP Tubing Products | Extruded & Heat … | Custom PTFE, PFA, and FEP tubing products including heat shrinkable and extruded options. | – High chemical resistance – Custom fabrication available | – Not certified to Mil Specifications 23053/11 and 23053/12 – Limited information on specific product dimensions |
| Custom-Manufactured PTFE Supplier | Prolon, Inc | PTFE, also known as Teflon, is a low friction fluoropolymer with outstanding chemical and weathering resistance. | – Excellent sliding properties and nonstick surface – Resistant to aggressive chemical agents and solvents | – Low mechanical strength – High specific gravity compared to other plastics |
| Shop PTFE Plastic Online – Curbell Plastics | PTFE (Polytetrafluoroethylene) is a high-performance plastic known for its non-stick properties and chemical resistance. | – Non-stick surface – High chemical resistance | – Can be expensive – Not suitable for high-stress applications | www.curbellplastics.com |
Frequently Asked Questions (FAQs)
What is PTFE and why is it used in manufacturing?
PTFE, or polytetrafluoroethylene, is a high-performance plastic known for its non-stick properties and resistance to heat, chemicals, and electrical conductivity. It’s commonly used in various applications, including cookware, seals, gaskets, and insulation, making it a popular choice in industries like aerospace, automotive, and electronics.
How do I choose a reliable PTFE supplier?
When selecting a PTFE supplier, consider their experience, product quality, certifications, and customer reviews. It’s also helpful to ask about their manufacturing processes and whether they can provide samples or custom solutions to meet your specific needs.
What are the typical lead times for PTFE products?
Lead times for PTFE products can vary based on the complexity of the order and the supplier’s capacity. Generally, you can expect lead times to range from a few days to several weeks. It’s best to communicate your timeline with the supplier to ensure they can meet your requirements.
Can PTFE be recycled?
PTFE is not easily recyclable due to its chemical structure, which makes it resistant to degradation. However, some specialized facilities may accept PTFE for recycling. It’s important to check with your local waste management services for proper disposal options.
What industries commonly use PTFE products?
PTFE products are widely used in various industries, including food processing, pharmaceuticals, electronics, automotive, and aerospace. Their unique properties make them ideal for applications requiring high durability, chemical resistance, and low friction.