Are you curious about which venturi tube manufacturers stand out in quality and innovation? Understanding the top factories is crucial for making informed choices. Discovering the best options can lead to enhanced performance and reliability in your projects. Dive in to find out which manufacturers deserve your attention!
Venturi Flow Tubes | Wyatt Engineering, LLC
Product Details: Wyatt Engineering’s venturi flow tubes are differential-producing flow elements that accurately and repeatably measure the flow of liquids or gases in closed, full-pipe conditions. Each venturi is designed to meet the client’s specific application requirements.
Technical Parameters:
– Reliable Long-Term Operation
– High Accuracy Over Entire Flow Range
– Energy Efficient, Low Permanent Pressure Loss
– Different Options for a Variety of Applications
Application Scenarios:
– Measurement of flow in closed, full-pipe conditions
– Applications requiring high accuracy and low pressure loss
Pros:
– High performance and flexible configurations
– Lowest permanent pressure loss as a percentage of differential pressure
Cons:
– Limited information on specific technical parameters
– Potentially higher initial cost compared to other flow measurement devices
Classical Venturi Tube | Supplier | Manufacturer – Differential …
Product Details: The Classical Venturi tube is a robust device designed for low pressure-loss applications, manufactured by ABB with over 100 years of expertise.
Technical Parameters:
– Available for line sizes from 50 mm to 1200 mm (2 to 48 in)
– Designed to ISO5167-1:2003 with a typical length of 5D (D = nominal pipe size)
Application Scenarios:
– Measurement of relatively clean liquids and gases in industrial processes
– Suitable for applications requiring low pressure loss
Pros:
– Robust design with low pressure loss
– Long-standing manufacturing expertise from ABB
Cons:
– Limited to clean liquids and gases
– May require specific installation conditions
Venturi Meters & Tubes | Made in USA | Amity Industries
Product Details: Amity offers various venturi meters and tubes including AVM-S-F, AVM-T-F, AVM-BD-F, AVM-I, AFM-V-F, and AFM-V-W, designed for measuring full pipe flows of clean gases or liquids.
Technical Parameters:
– Accuracy typically .25% to .50% of actual flow
– Designed for various temperature and pressure ranges
Application Scenarios:
– Measuring flow in industrial applications
– Custom solutions for specific engineering requirements
Pros:
– Superior quality and tight tolerances
– Industry leader in consistent uncalibrated results
Cons:
– Potentially higher cost for custom solutions
– Limited information on specific applications
Venturi, venturi tubes, ASME venturi flow elements – imperialco.net
Product Details: Imperial manufactures a complete line of differential pressure ASME Herschel type venturis designed for specific beta ratios and throat diameters.
Technical Parameters:
– 0.75% accuracy without laboratory flow calibration
– Manufactured from various materials including carbon steel, stainless steel, and…
Application Scenarios:
– Petrochemical and refining industries
– Water sewage and power plants
Pros:
– Low pressure loss leading to cost savings
– Economical, lightweight, versatile, and non-corrosive
Cons:
– Requires specific straight pipe lengths for accurate measurement
– May need cleanout rods for fluids containing solids
Venturi tubes – Den Holder engineering products
Product Details: Den Holder is a manufacturer of all types of Venturi Tubes, designed according to client requirements or international standards, primarily ISO 5167.
Technical Parameters:
– Materials: A105N, A350LF2, A182-F5, F11, F22, F91, C21, A516 Gr. 60,65,70, A106G…
– Design codes: ISO 5167, ASME, BS, DIN 1952, Stoomwezen
Application Scenarios:
– Oil and gas industry
– Flow measurement applications
Pros:
– Customizable according to client specifications
– Manufactured in compliance with international standards
Cons:
– Limited to specific types of Venturi tubes (A, B, C)
– Potentially high manufacturing costs for custom designs
Venturi Tubes, Venturi Tube Manufacturers, Venturi Tubes Facts
Product Details: Tri Flo Tech manufactures venturi flow tubes since 1984, specializing in ASME pressure vessels and custom crafting from various materials including carbon steel and stainless steel. They can manufacture tubes up to 126″ in diameter and offer capabilities such as PP stamp, U Stamp, and 100% NDT.
Technical Parameters:
– Manufactured from carbon steel, stainless steel, and exotic materials like tanta…
– Available sizes from 1/2″ to 12.0″ in diameter
Application Scenarios:
– Measuring the flow of fluids in various industrial applications
– HVAC systems for manual balancing with butterfly valves
Pros:
– Lower permanent pressure loss compared to flow nozzles and orifice plates
– Energy efficient and cost-effective
Cons:
– Requires careful consideration of accuracy standards
– Quality control depends on the manufacturing company
Venturi Tube | Venturi Meter | Venturi Flow Meter Manufacturers – Tek-Trol
Product Details: Tek-DP 1640A Venturi Tube is an ideal flow measurement solution for a wide range of clean liquids and gases. This low-pressure metering device provides constant accuracy, greater capacity, high-pressure recovery, minimal permanent pressure loss.
Technical Parameters:
– Accuracy ≤ ± 0.5 % of the actual flow rate
– Repeatability 0.1%
Application Scenarios:
– Flow measurement for clean liquids
– Flow measurement for gases
Pros:
– Durable and optimized design, easy to install
– Highest pressure recovery with lowest permanent pressure loss
Cons:
– Limited to clean liquids and gases
– Requires specific installation orientations
Bifwater Venturi Meter Manufacturer – Home
Product Details: Generic product details placeholder
Technical Parameters:
– Generic technical parameter 1
– Generic technical parameter 2
Application Scenarios:
– Generic application scenario 1
– Generic application scenario 2
Pros:
– Generic pro 1
– Generic pro 2
Cons:
– Generic con 1
– Generic con 2
Venturi Tube – Supplier & Distributor – Bliss Flow Systems
Product Details: Venturi Tubes serve users with accurate measurement of non-viscous fluids in clean & dirty streams. They are virtually maintenance-free and corrosion-resistant, manufactured in accordance with ASME MFC-3M, BS-1042, and ISO-5167 standards.
Technical Parameters:
– Up to 12 inches, the entire venturi is machined from a single solid bar-stock.
– For critical measurement applications, wet calibration at reputed flow laborator…
Application Scenarios:
– Measurement of non-viscous fluids in various industrial applications.
– Used in piping systems where space constraints require a truncated design.
Pros:
– Accurate measurement with +/-1.0% uncertainty of discharge coefficient.
– Lower permanent pressure loss and greater capacity than other differential meter…
Cons:
– Requires specific piping geometry for optimal performance.
– May not be suitable for viscous fluids.
Flow Elements | Manufacturer of Venturi Tube – Electronet Equipments
Product Details: Electronet series Venturi is the second most common differential pressure primary element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications.
Technical Parameters:
– Extremely low pressure loss
– Higher durability
Application Scenarios:
– Water and Waste Water Industry
– Chemical Industry
Pros:
– Minimal loss of pressure
– Lower chance of catching sludge media and sediment
Cons:
– Pressure recovery is less efficient compared to orifice plates
– Limited to specific flow measurement applications
Related Video
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Venturi Flow Tubes | Wyatt Engineering, LLC | Wyatt Engineering’s venturi flow tubes are differential-producing flow elements that accurately and repeatably measure the flow of liquids or gases in… | – High performance and flexible configurations – Lowest permanent pressure loss as a percentage of differential pressure | – Limited information on specific technical parameters – Potentially higher initial cost compared to other flow measurement devices |
| Classical Venturi Tube | Supplier | Manufacturer – Differential … | The Classical Venturi tube is a robust device designed for low pressure-loss applications, manufactured by ABB with over 100 years of expertise. | – Robust design with low pressure loss – Long-standing manufacturing expertise from ABB |
| Venturi Meters & Tubes | Made in USA | Amity Industries | Amity offers various venturi meters and tubes including AVM-S-F, AVM-T-F, AVM-BD-F, AVM-I, AFM-V-F, and AFM-V-W, designed for measuring full pipe flow… | – Superior quality and tight tolerances – Industry leader in consistent uncalibrated results |
| Venturi, venturi tubes, ASME venturi flow elements – imperialco.net | Imperial manufactures a complete line of differential pressure ASME Herschel type venturis designed for specific beta ratios and throat diameters. | – Low pressure loss leading to cost savings – Economical, lightweight, versatile, and non-corrosive | – Requires specific straight pipe lengths for accurate measurement – May need cleanout rods for fluids containing solids | imperialco.net |
| Venturi tubes – Den Holder engineering products | Den Holder is a manufacturer of all types of Venturi Tubes, designed according to client requirements or international standards, primarily ISO 5167. | – Customizable according to client specifications – Manufactured in compliance with international standards | – Limited to specific types of Venturi tubes (A, B, C) – Potentially high manufacturing costs for custom designs | www.denholder.com |
| Venturi Tubes, Venturi Tube Manufacturers, Venturi Tubes Facts | Tri Flo Tech manufactures venturi flow tubes since 1984, specializing in ASME pressure vessels and custom crafting from various materials including ca… | – Lower permanent pressure loss compared to flow nozzles and orifice plates – Energy efficient and cost-effective | – Requires careful consideration of accuracy standards – Quality control depends on the manufacturing company | triflotech.com |
| Venturi Tube | Venturi Meter | Venturi Flow Meter Manufacturers – Tek-Trol | Tek-DP 1640A Venturi Tube is an ideal flow measurement solution for a wide range of clean liquids and gases. This low-pressure metering device provide… | – Durable and optimized design, easy to install – Highest pressure recovery with lowest permanent pressure loss |
| Bifwater Venturi Meter Manufacturer – Home | Generic product details placeholder | – Generic pro 1 – Generic pro 2 | – Generic con 1 – Generic con 2 | www.bifwater.com |
| Venturi Tube – Supplier & Distributor – Bliss Flow Systems | Venturi Tubes serve users with accurate measurement of non-viscous fluids in clean & dirty streams. They are virtually maintenance-free and corrosion-… | – Accurate measurement with +/-1.0% uncertainty of discharge coefficient. – Lower permanent pressure loss and greater capacity than other differential… | – Requires specific piping geometry for optimal performance. – May not be suitable for viscous fluids. | blissflowsystems.com |
| Flow Elements | Manufacturer of Venturi Tube – Electronet Equipments | Electronet series Venturi is the second most common differential pressure primary element. It is based on proven technology. It has no moving parts an… | – Minimal loss of pressure – Lower chance of catching sludge media and sediment | – Pressure recovery is less efficient compared to orifice plates – Limited to specific flow measurement applications |
Frequently Asked Questions (FAQs)
What is a venturi tube and how does it work?
A venturi tube is a device used to measure fluid flow. It works on the principle of fluid dynamics, where the fluid’s velocity increases as it passes through a constricted section of the tube, causing a drop in pressure. This pressure difference can be used to calculate the flow rate.
What materials are commonly used in manufacturing venturi tubes?
Venturi tubes are typically made from materials like stainless steel, PVC, or other corrosion-resistant materials. The choice of material depends on the application, fluid type, and environmental conditions.
How do I choose the right venturi tube manufacturer?
When selecting a manufacturer, consider their experience, product quality, certifications, and customer reviews. It’s also helpful to check if they offer customization options to meet your specific needs.
What industries commonly use venturi tubes?
Venturi tubes are widely used in various industries, including water treatment, chemical processing, HVAC systems, and food and beverage production. They are essential for applications requiring accurate flow measurement.
Can venturi tubes be used for both liquids and gases?
Yes, venturi tubes can be used for measuring the flow of both liquids and gases. However, the design and sizing may vary based on the fluid’s properties, so it’s important to consult with the manufacturer for the best fit for your application.